Cacti 0.8.8b Windows Templates Updated

The new version of cacti was released a few weeks ago which is now 0.8.8b. I have exported the templates from this new version and they are available on GitHub.

https://github.com/mrlesmithjr/cacti.git

git clone https://github.com/mrlesmithjr/cacti/

Go here for older versions of these templates.

9 thoughts on “Cacti 0.8.8b Windows Templates Updated

  1. Hi!

    I found your templates via Google and it looks very promising to me!

    I tried installing the cacti templates in a brand new cacti install on a Win2k3 server.

    I get some errors in the poller log:

    09/06/2013 12:32:06 PM – CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'XXXXXXXX', and OID:'.1.3.6.1.4.1.9600.1.1.1.1.8.enterprises.9600.1.1.1.1.1.6.95.84.111.116.97.108'

    09/06/2013 12:32:06 PM – CMDPHP: Poller[0] Host[5] DS[39] WARNING: Result from SNMP not valid. Partial Result: U

    When I do an SNMP walk I get this:

    D:xampphtdocscacti>snmpwalk -v 1 -t 5 -c localhost .1.3.6.1.4.1.9600.1.1.1.1.8.enterprises.9600.1.1.1.1.1.6.95.84.111.116.97.108.1.3.6.1.4.1.9600.1.1.1.1.8.enterprises.9600.1.1.1.1.1.6.95.84.111.116.97.108:

    (Sub-id not found: enterprises -> enterprises.9600.1.1.1.1.1.6.95.84.111.116.97.108)

    I googled a lot for this error, but can't find an answer. Can you help me out?

    Regards,

    Rob

    • Rob,

      I have never ran Cacti on a Windows Server so I am not sure all the ins and outs of it. I have been running Cacti for about 6 years everyday on Linux which runs great for me.

  2. I met with the same problem. But I run cacti 0.8.8b in linux server.

    Is the template incorrect?

    [root@sh-hq-cacti etc]# snmpget -c public -v 2c 192.168.202.113 .1.3.6.1.4.1.9600.1.1.5.1.3.

    No log handling enabled – turning on stderr logging

    .1.3.6.1.4.1.9600.1.1.5.1.3.: Unknown Object Identifier (Sub-id not found: enterprises -> )

    [root@sh-hq-cacti etc]# snmpget -c public -v 2c 192.168.202.113 .1.3.6.1.4.1.9600.1.1.5.1.3..1.3.6.1.4.1.9600.1.1.5.1.1

    No log handling enabled – turning on stderr logging

    .1.3.6.1.4.1.9600.1.1.5.1.3..1.3.6.1.4.1.9600.1.1.5.1.1: Unknown Object Identifier (Sub-id not found: enterprises -> .1.3.6.1.4.1.9600.1.1.5.1.1)

    [root@sh-hq-cacti etc]# snmpget -c public -v 2c 192.168.202.113 .1.3.6.1.4.1.9600.1.1.5.1.3

    Error in packet

    Reason: (noSuchName) There is no such variable name in this MIB.

    Failed object: SNMPv2-SMI::enterprises.9600.1.1.5.1.3

    [root@sh-hq-cacti etc]# snmpget -c public -v 2c 192.168.202.113 .1.3.6.1.4.1.9600.1.1.5.1

    Error in packet

    Reason: (noSuchName) There is no such variable name in this MIB.

    Failed object: SNMPv2-SMI::enterprises.9600.1.1.5.1

    Operating System:unix

    Cacti:0.8.8b

    Spine:0.8.8b

    PHP:5.3.3

    RRDTool (Cygwin or Win32 build):1.3.x

    Net-SNMP:5.5

  3. @Jay – Are you trying to walk the SNMP tree on a Windows device? If so, have you installed snmp_informant for windows and enabled the snmp service?

  4. I have installed snmp_informant std 1.7 and enabled the snmp service.

    Is necessary to do the command below? I only copy the .xml files to the resourcesnmp_queries folder on cacti server.

    [quote]

    1.Copy files from the resourcesnmp_queries folder extracted to the cacti server using WinSCP to the /tmp folder.

    2.Now on the cacti server cd /tmp

    3.sudo cp snmp_informant_standard_*.xml /usr/share/cacti/site/resource/snmp_queries/

    [/quote]

  5. We’ve been using your templates (snmp informant) for years to graph our Windows servers. We recently upgraded our Ubuntu cacti server from 12.04 to 14.04, which also brought cacti from 0.8.7i to 0.8.8b. Everything worked great, except for disk metrics (queues / transfers). Thumbnails generate, and the graph debugging and preview work. Data is collected without issue. However, no actual graphs are generated (aside from thumbnails). Other graphs based upon your templates continue to soldier on.

    I created a brand new 14.04 guest (to rule out any oddities while performing the OS upgrade), and it exhibits the exact same behavior. Some images:

    http://i.imgur.com/wYnVPDX.png (showing the graphing debug, looks great)

    http://i.imgur.com/IR6F8jP.png (corresponding actual graphs)

    Any ideas would be greatly appreciated!

    • @Dave – First off, glad those templates have been of good use for you over the years. As far as any issues with newer versions of Cacti I am not aware of any. It sounds like the rra’s are having permissions issues just off the top of my head. I will do some investigating on my end as well. I actually just recently built out a new Cacti server and have not had a chance to do much testing.

  6. Thanks for the quick response! To clarify, the RRAs update fine. It’s not the version of cacti (this is on 0.8.8b), it’s actually the version of Ubuntu (14.04) so is likely some package version difference between that and 12.04. The thumbnail graph generates with good data. In fact, if I go into graph debugging it shows OK and the preview graph is good. It simply does not update the various graphs (_1, _5, etc). If it makes a difference, I’m using graph export.

    http://i.imgur.com/hYrVH5C.png

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>